Frequently Asked Questions

Search for a FAQ

Browse by Category

Home > Keyboards > SteelSeries Shift

How can I swap keysets on the SteelSeries Shift keyboard?

1) On the right side of the keyset, pull out and up on the tab marked "SteelSeries."
2) The keyset is separated into three sections. Fold the keyset into the three sections and remove it from the base.
3) Make sure the keyset that you want to insert is folded similarly to the one you just removed. Without unfolding, take note of the three plastic tabs emerging from the side of the bottom panel. These three tabs correspond with three slots on the left side of the Shift base.
4) Holding the folded Shift keyset in your right hand, insert the three plastic tabs into the corresponding slots in the base. Make sure the tabs are inserted correctly and that the edge of the keyset is aligned with the edge of the base.
5) Take a hold of the small latch on the right-side of the top keyset panel and use it as a handle. Pulling gently while holding the left-most panel in the base with your left hand, press the middle panel down into place.
6) Finally, insert the right-most panel into the last empty section of the keyset cavity and secure the latch into place by slightly pushing it down.